WheelView Software

Software Features:          

                                      

WheelView® software components are:

1-     Monitoring/Control/Management Software (Process Management)

2-     Digital Image Acquisition/Processing Software (DIAP)

3-     Installation/Calibration Software (I/C)

4-     Database/Data Search/Data Interface Software (DB)

 

Monitoring/Control/Management Software

Monitoring/Control/Management Software uses extensive input/output capabilities of the system to monitor the system condition and control of all components, including:

a.       Temperature control & humidity monitoring

b.      Shutter control

c.       Turn all system components on/off when system starts and stops operating (sensor triggered events)

d.      Check functionalities of all components for local and remote maintenance

e.       Manage the communication between all system components such as acquisition, control, processing units, database, AEI, etc.

f.        Report any malfunction locally and to all remote sites. All components of the system have feed-back monitoring to determine possible problems of every component.

g.       Manage the communication between the local site and the central site using web connection, leased line connection, dial up connection, etc. The system has a client/server configuration.

h.       Login/Access status

                         

Installation/Calibration Software

Installation/Calibration Software has the task of providing the information needed during the installation and system set up for AEI system, trigger system, and calibration. The calibration software is also used for system recalibration, whenever necessary.

 

Digital Image Acquisition/Processing Software

Digital Image Acquisition/Processing Software controls the image acquisition and performs processing of acquired digital images. The imaging system can handle image acquisition at high speeds. The software also manages data processing by dividing the processing tasks between different CPU units.

 

Database software

All the measured data including the profile measurements are stored in a database for further use. Searching for a specific wheel and/or car, a range of cars and wheels, a specific parameter with a desired range; drawing graphs or scatter plots; predictions of wear rates based on existing data are among the many tasks that can be performed using this software.